Hantle 4000T Series ATM

The Hantle t4000 ATM provides an economical, high performance through-the-wall solution with the look and feel of an actual bank ATM.

Designed and built with compact modular components and engineered for easy installation and reliable operation. The t4000 includes a host of high-end features including a 10.4” Sun-Viewable Color LCD supporting custom screen advertisements and communication via 56K Modem or integrated Ethernet (SSL). A rear-service panel allows convenient and safe access for ATM Operators and Service personal.

The t4000 is TDES and ADA compliant out of the box, including a PCI/VIS/Interac certified encrypting PIN pad (EPP), a voice guidance system, and lighted action indicators (including lighted keypad).


Dimension and Weight

Width: 20 inches
Depth: 27.5 inches
Height: 31.5 inches
Weight: 390 pounds

Main Control Board

Samsung S3C2440AL-40 RISC 32-bit CPU
64MB RAM (not expandable)
WinCE™ 5.0 Operating System
56Kb modem
Integrated Ethernet (RJ-45)
Electronic Journal – stores up to 40,000 transactions

Power Supply

Power switch
110 / 220 volts (manual selection)
60 / 50Hz
175 watts (max)
Fuse protection

Receipt Printer

3” inch (80mm) thermal printer
Automatic paper loading and cutting
Paper out status sensor
200 DPI Monographic Printing (576p x 222p)

Cash Dispensing Unit

Friction feed mechanism
Dispense capacity of 1700 (Rear Load)
Reject bin
Ultrasonic Double-Detection sensor
Cash dispensing unit is mounted on a sliding panel for easy service
Automatic Jam-Clearing function reverses jams and diverts to reject bin

LCD Display and Function Keys

10.4 inch TFT LCD panel 800 x 600 resolution SVGA
High-Brightness for outdoor visability
Eight function keys for menu selection
Displays up to 8 customizable center graphics screens and banner ads which rotate on idle, and while processing

Magnetic Card Reader

Dip type
Reads ISO tracks 1 and 2
EMV (optional)

Keypad

Triple DES compliant Encrypted Pin Pad (EPP)
PCI Certified (approval number 4-70003) / Interac Certified (Canada)
Tamper resistant design erases all programming and stored master keys if opened
16 keys with integrated Braille symbols
0 – 9 for numeric entry
Left and right arrows for scrolling
ENTER, CLEAR, CANCEL and BLANK keys

Front Bezel Assembly

The front bezel assembly consists of a front bezel, LCD module, key pad module, magnetic card reader module, ADA voice guidance jack, and a pull down cash tray
Lighted Transaction Guidance System
Integrated Topper Sign

Chassis

The main chassis houses a main-control board, power supply, receipt printer on a slide out tray
The chassis has removable panels on the sides and rear for easy access for maintenance or service
Include an Integrated illuminated topper

Vault

UL listed combination lock (electronic locks optional)
Removable door
Vault mounted within the Main Chassis

Power Requirement

110 /220VAC Manual switch
Requires LINE, NEUTRAL, and GROUND

Phone Line

Requires dedicated ‘Analog’ phone line – Not for use with ‘Digital’ lines
RJ-11 phone jack

Temperature and Humidity

Storage: 32F – 104F, 10% < RH < 90% non-condensing Operating: 40F – 95F, 15% < RH < 85% non-condensing

Supported Protocols

Standard1 (Tranax Spec)
Standard2 (CSP200 emulation)
Standard3 (Extended Message Format)
EPS
TCP/IP Formats
Standard TCPIP
VISA Frame TCPIP
ACK Controlled TCPIP
SSL Pass-Through
SSL Length Prefix W/O ETX
SSL Length Prefix With ETX

Wireless

Compatible with most 3rd party wireless devices
Consult with your transaction processor for approved devices

1 Response

  1. I am really glad to read this website posts which consists of tons of helpful information, thanks for providing these kinds of data.

Leave a comment

Interested in this specific equipment? Please fill out the form below to get in contact with us.

ATM Equipment Inquiry

Please fill out the form below to inquiry.

General Inquiry
×
Inquiry Today
×